news
counter

Semiautomatic L-sealers with shrink tunnel FP 560a_t450

 

Technical Specification Of FP560A

Continuous cycle sealing

Pack deviation device

Film waste winding device as standard supply

PTFE-coated sealing blade

Closed-circuit liquid cooling of the sealing bars

Viewer of the coolant level

Working height of the sealer and of the tunnel adjustable by means of an external crank

Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size

Emergency button

Automatic pack discharge by means of a motorized conveyor

Flextron® control system equipped with:

alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays

modular power section, separated from the control panel and characterized by:

- longer-lasting solid state relays providing easier maintenance

- in case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory

This system allows a simple and precise control of all the machine operations, such as:

- machine status

- number of packs produced by an electronic pack counter

- real-time production

- adjustment of the sealing temperature

- pack discharge speed

- Automatic hood closing and re-opening, motorized and managed by Inverter

- delay in the opening of the sealing arm

- Sealing arm safety device

- possibility of scheduling up to 10 different work cycles, thus resulting in increased productivity and simplified use

- troubleshooting

Reduced power consumption

Compliance with CE regulations.

 Technical data - FP560A

Power supply  220 - 240 V

            1PH - N - PE

            50/60 Hz

Installed power            2500 W

Sealing bar      560 x 430 mm

Maximum pack height            230 mm

Average output per hour         up to 1500 pph **

Maximum size of film reel      600 - ø 300 mm

Machine size   2010 x 790 mm

            h 1050 mm

Machine net weight     145 Kg

Packed machine size 1400 x 880 mm

            h 1160 mm

Packed machine weight         177 Kg

Usable Films: Pvc, Polyolefins and Polyethylene      up to 50 µ

Advantages - T450

Single-chamber shrink tunnel

FLXMOD® control system equipped with:

alphanumeric LCD control panel provided with a 16-bit microprocessor card

modular power section, separated from the control panel and equipped with inverter and remote-control switches

This system allows a simple and precise control of all the machine operations, such as:

- adjustment of the tunnel conveyor speed

- adjustment of the tunnel shrinking temperature

- possibility of scheduling up to 10 different work cycles

Tunnel conveyor with turning or fixed silicone-coated rollers

Cooling system

Tunnel air flow adjustable by flaps

Reduced power consumption

Compliance with CE regulations

Technical data - T450

Power supply    220 - 240 / 380 – 415 V

3PH + PE / 3PH + N + PE

50/60 Hz

Installed power  8000 W

Maximum pack height    230 mm

Speed of conveyors      2,8 - 18,8 m/min

Machine size     1310 x 835 mm

h 1440 mm

Machine net weight        187 Kg

Packed machine size     1420 x 960 mm

h 1540 mm

Packed machine weight 223 Kg

Usable Films: Pvc, Polyolefins and Polyethylene            up to 50 µ

powered by  
Copyright © 2011 INTERNATIONAL PACKAGING SYSTEMS  |  About Us  |  Contact Us  |